1. Rocky Mountain Slayer C90 Overview
The Rocky Mountain Slayer C90 is the ultimate freeride and big-mountain enduro machine, designed for steep descents, massive jumps, and aggressive technical riding. Featuring 170mm of travel front and rear, a full carbon frame, and top-tier Fox Factory suspension, the Slayer C90 is built to handle anything you throw at it.
Key Features:
✔ 170mm front and 170mm rear travel – Engineered for extreme downhill and freeride terrain.
✔ Fox 38 Factory GRIP2 Fork – Kashima-coated, ultra-adjustable high-performance suspension.
✔ Fox Float X2 Factory Shock – Maximum small bump sensitivity and big-hit control.
✔ SMOOTHWALL Carbon Frame – Lightweight, ultra-durable, and built for aggressive riding.
✔ Shimano XTR 12-Speed Drivetrain – Premium shifting precision with a wide-range cassette.
✔ Maxxis Assegai / Minion DHR II Tires – Unmatched grip for technical descents.
For Rocky Mountain Slayer models, parts, and upgrades, visit MoreBikes.ca.
2. Suspension Setup – Geometry and Sag Adjustment
The Slayer’s adjustable chainstay length allows you to customize handling for different riding styles.
Chainstay Adjustment and Effects:
🔹 Short Setting (434mm) – Faster handling for jumps and tight technical trails.
🔹 Long Setting (447mm) – Added stability for steep, high-speed descents.
Sag Setup for Maximum Performance:
- Step 1: Wear full riding gear and get on the bike.
- Step 2: Bounce lightly to settle the suspension.
- Step 3: Measure sag using the O-ring or a sag meter.
-
Step 4: Adjust air pressure according to recommended settings:
- Freeride / Bike Park: 28-33% sag
- Enduro / Technical Riding: 25-30% sag
- More Pedal Efficiency: 20-25% sag
For shock pumps and setup tools, visit MoreBikes.ca.
3. Suspension Tuning – Rebound and Compression Adjustments
Rebound Tuning:
✔ Too Fast? The bike feels bouncy and unstable on landings.
✔ Too Slow? The suspension does not recover quickly, reducing control.
✅ Pro Tip: Start at mid-range rebound settings, then fine-tune based on terrain and weight.
Compression Damping:
✔ High-Speed Compression (HSC): Controls fork and shock behavior on big drops and jumps.
✔ Low-Speed Compression (LSC): Affects small bump sensitivity and pedaling efficiency.
Tuning Tip: Increase HSC for high-speed rough terrain, and adjust LSC for better support on climbs.
For suspension tuning kits and service parts, check MoreBikes.ca.
4. Drivetrain and Braking Setup
Shimano XTR 12-Speed Drivetrain:
- Ultra-smooth shifting and lightweight performance for aggressive riders.
- Keep the chain lubed and check for wear every 500km.
- Adjust derailleur tension for optimal shifting performance.
Brakes – Shimano XTR 4-Piston Hydraulic Disc Brakes:
✔ Check brake pads for wear every 3 months.
✔ Bleed brakes every 6-12 months for consistent stopping power.
✔ Adjust lever reach and bite point for a personalized braking feel.
For brake pads, rotors, and upgrade kits, visit MoreBikes.ca.
5. Rocky Mountain Slayer C90 Service Schedule
Basic Maintenance Schedule:
✔ Before Every Ride: Check tire pressure, bolts, and drivetrain.
✔ Every 50 Hours (2-3 months): Clean suspension seals, inspect brake pads.
✔ Every 100 Hours (6 months): Lower leg service, drivetrain deep clean.
✔ Every 200 Hours (Annually): Full suspension rebuild, brake bleed, and bearing inspection.
For Rocky Mountain service kits and parts, check MoreBikes.ca.
6. Where to Get Your Rocky Mountain Slayer C90 Serviced
For professional servicing and upgrades, visit MoreBikes.ca – your source for Rocky Mountain bikes, parts, and maintenance essentials.
Final Thoughts
The Rocky Mountain Slayer C90 is a top-tier freeride and enduro race machine, built for huge drops, steep descents, and aggressive terrain. With adjustable geometry, Fox Factory suspension, and Shimano XTR components, this bike is designed to handle the gnarliest lines with confidence.
For Rocky Mountain bikes, parts, and accessories, visit MoreBikes.ca today! 🚴🔥
RockyMountainSlayer, FreerideBike, EnduroMTB, SuspensionTuning, MTBSetup, AdjustableChainstay, FoxSuspension, MoreBikes, MTBTech