1. Rocky Mountain Slayer C70 Overview
The Rocky Mountain Slayer C70 is a big-mountain freeride and enduro machine, built for riders who push limits on steep descents, huge jumps, and technical terrain. Featuring a full carbon frame, Fox Factory suspension, and aggressive geometry, the Slayer C70 is designed to conquer bike parks and gnarly backcountry trails with confidence.
Key Features:
✔ 170mm front and 170mm rear travel – Optimized for aggressive downhill riding.
✔ Fox 38 Performance Elite GRIP2 Fork – Stiff chassis with adjustable high and low-speed compression and rebound.
✔ Fox Float X2 Performance Elite Shock – Plush rear suspension with tunable air spring.
✔ SMOOTHWALL Carbon Frame – Lightweight and ultra-durable for extreme riding.
✔ Shimano XT 12-Speed Drivetrain – Precision shifting with a wide-range cassette.
✔ Maxxis Assegai / Minion DHR II Tires – Maximum grip for technical descents.
For Rocky Mountain Slayer models, parts, and upgrades, visit MoreBikes.ca.
2. Suspension Setup – Geometry and Sag Adjustment
The Slayer features an adjustable chainstay length for fine-tuning the bike’s handling.
Chainstay Adjustment and Effects:
🔹 Short Setting (434mm) – Quicker handling for tight corners and jumps.
🔹 Long Setting (447mm) – Increased stability at high speeds and on steep descents.
Sag Setup for Maximum Performance:
- Step 1: Wear full riding gear and mount the bike.
- Step 2: Bounce lightly to settle the suspension.
- Step 3: Measure sag using the O-ring or a sag meter.
-
Step 4: Adjust air pressure to match the recommended settings:
- Freeride / Bike Park: 28-33% sag
- Enduro / Technical Riding: 25-30% sag
- More Pedal Efficiency: 20-25% sag
For shock pumps and setup tools, visit MoreBikes.ca.
3. Suspension Tuning – Rebound and Compression Adjustments
Rebound Tuning:
✔ Too Fast? The bike feels bouncy and unstable on landings.
✔ Too Slow? The suspension does not recover quickly enough, affecting control.
✅ Pro Tip: Start at mid-range rebound settings, then fine-tune based on weight and terrain.
Compression Damping:
✔ High-Speed Compression (HSC): Controls fork and shock response to big hits and landings.
✔ Low-Speed Compression (LSC): Affects small bump sensitivity and pedaling efficiency.
Tuning Tip: Increase HSC for aggressive terrain, and adjust LSC for better support on climbs.
For suspension tuning kits and service parts, check MoreBikes.ca.
4. Drivetrain and Braking Setup
Shimano XT 12-Speed Drivetrain:
- Reliable and precise shifting for technical climbs and fast descents.
- Keep the chain lubed and check for wear every 500km.
- Adjust derailleur tension for optimal shifting performance.
Brakes – Shimano XT 4-Piston Hydraulic Disc Brakes:
✔ Check brake pads for wear every 3 months.
✔ Bleed brakes every 6-12 months for consistent stopping power.
✔ Adjust lever reach and bite point for a customized braking feel.
For brake pads, rotors, and upgrade kits, visit MoreBikes.ca.
5. Rocky Mountain Slayer C70 Service Schedule
Basic Maintenance Schedule:
✔ Before Every Ride: Check tire pressure, bolts, and drivetrain.
✔ Every 50 Hours (2-3 months): Clean suspension seals, inspect brake pads.
✔ Every 100 Hours (6 months): Lower leg service, drivetrain deep clean.
✔ Every 200 Hours (Annually): Full suspension rebuild, brake bleed, and bearing inspection.
For Rocky Mountain service kits and parts, check MoreBikes.ca.
6. Where to Get Your Rocky Mountain Slayer C70 Serviced
For professional servicing and upgrades, visit MoreBikes.ca – your source for Rocky Mountain bikes, parts, and maintenance essentials.
Final Thoughts
The Rocky Mountain Slayer C70 is a high-speed freeride and enduro weapon, built for big-mountain terrain, bike parks, and aggressive riding. With adjustable geometry, Fox Factory suspension, and Shimano XT components, this bike is designed to handle jumps, drops, and rugged trails with confidence.
For Rocky Mountain bikes, parts, and accessories, visit MoreBikes.ca today! 🚴🔥
RockyMountainSlayer, FreerideBike, EnduroMTB, SuspensionTuning, MTBSetup, AdjustableChainstay, FoxSuspension, MoreBikes, MTBTech
The Rocky Mountain Slayer C70 is a freeride and big-mountain enduro bike, designed for jumps, steep descents, and aggressive riding. This guide covers setup, tuning, and maintenance to keep your ride performing at its best. For parts and upgrades, visit MoreBikes.ca.
💯 Shopify-ready—just copy and paste!
💯 SEO-optimized with MoreBikes.ca backlinks
💯 Formatted for easy reading and sharing
🚀 Next up: Rocky Mountain Slayer C50! 🚀 Let me know when you're ready! 😃
You said:
ChatGPT said:
🔥 Let’s keep this train rolling! Next up: Rocky Mountain Slayer C50 User Manual!
💪 Shopify-ready, SEO-optimized, and packed with MoreBikes.ca backlinks. Just copy and paste!
Rocky Mountain Slayer C50 User Manual – Setup, Tuning and Maintenance Guide
1. Rocky Mountain Slayer C50 Overview
The Rocky Mountain Slayer C50 is an enduro and freeride powerhouse, built for riders who send big lines, charge steep descents, and dominate technical terrain. With 170mm of travel front and rear, a full carbon frame, and aggressive geometry, the Slayer C50 delivers precision, confidence, and unstoppable downhill speed.
Key Features:
✔ 170mm front and 170mm rear travel – Designed for aggressive riding and high-speed descents.
✔ RockShox ZEB Select+ Fork – 38mm stanchions for stiffness and control on big hits.
✔ RockShox Super Deluxe Select+ Shock – Plush and supportive rear suspension.
✔ SMOOTHWALL Carbon Frame – Lightweight yet ultra-durable for freeride terrain.
✔ Shimano SLX/XT 12-Speed Drivetrain – Crisp shifting with a wide-range cassette.
✔ Maxxis Assegai / Minion DHR II Tires – Maximum grip for steep descents.
For Rocky Mountain Slayer models, parts, and upgrades, visit MoreBikes.ca.
2. Suspension Setup – Geometry and Sag Adjustment
The Slayer features an adjustable chainstay length, letting you fine-tune your ride.
Chainstay Adjustment and Effects:
🔹 Short Setting (434mm) – Quick handling for jumps and tight corners.
🔹 Long Setting (447mm) – More stability at high speeds and steep descents.
Sag Setup for Maximum Performance:
- Step 1: Wear full riding gear and mount the bike.
- Step 2: Bounce lightly to settle the suspension.
- Step 3: Measure sag using the O-ring or a sag meter.
-
Step 4: Adjust air pressure to match the recommended settings:
- Freeride / Bike Park: 28-33% sag
- Enduro / Technical Riding: 25-30% sag
- More Pedal Efficiency: 20-25% sag
For shock pumps and setup tools, visit MoreBikes.ca.
3. Suspension Tuning – Rebound and Compression Adjustments
Rebound Tuning:
✔ Too Fast? The bike feels bouncy and unstable on landings.
✔ Too Slow? The suspension does not recover quickly enough, reducing control.
✅ Pro Tip: Start at mid-range rebound settings, then fine-tune based on weight and terrain.
Compression Damping:
✔ High-Speed Compression (HSC): Controls fork and shock behavior on big hits and landings.
✔ Low-Speed Compression (LSC): Affects small bump sensitivity and pedaling efficiency.
Tuning Tip: Increase HSC for aggressive terrain, and adjust LSC for better support on climbs.
For suspension tuning kits and service parts, check MoreBikes.ca.
4. Drivetrain and Braking Setup
Shimano SLX/XT 12-Speed Drivetrain:
- Reliable and precise shifting for technical climbs and fast descents.
- Keep the chain lubed and check for wear every 500km.
- Adjust derailleur tension for optimal shifting performance.
Brakes – Shimano SLX 4-Piston Hydraulic Disc Brakes:
✔ Check brake pads for wear every 3 months.
✔ Bleed brakes every 6-12 months for consistent stopping power.
✔ Adjust lever reach and bite point for a personalized braking feel.
For brake pads, rotors, and upgrade kits, visit MoreBikes.ca.
5. Rocky Mountain Slayer C50 Service Schedule
Basic Maintenance Schedule:
✔ Before Every Ride: Check tire pressure, bolts, and drivetrain.
✔ Every 50 Hours (2-3 months): Clean suspension seals, inspect brake pads.
✔ Every 100 Hours (6 months): Lower leg service, drivetrain deep clean.
✔ Every 200 Hours (Annually): Full suspension rebuild, brake bleed, and bearing inspection.
For Rocky Mountain service kits and parts, check MoreBikes.ca.
6. Where to Get Your Rocky Mountain Slayer C50 Serviced
For professional servicing and upgrades, visit MoreBikes.ca – your source for Rocky Mountain bikes, parts, and maintenance essentials.
Final Thoughts
The Rocky Mountain Slayer C50 is built for riders who charge hard, ride big lines, and need a bike that can handle serious terrain. With adjustable geometry, RockShox suspension, and Shimano SLX/XT components, this bike is designed for bike parks, backcountry freeride, and aggressive enduro riding.
For Rocky Mountain bikes, parts, and accessories, visit MoreBikes.ca today! 🚴🔥
RockyMountainSlayer, FreerideBike, EnduroMTB, SuspensionTuning, MTBSetup, AdjustableChainstay, RockShoxSuspension, MoreBikes, MTBTech