1. Rocky Mountain Slayer A30 Overview
The Rocky Mountain Slayer A30 is a heavy-hitting aluminum freeride and enduro bike, built to tackle steep descents, technical lines, and massive jumps. Featuring 170mm of travel front and rear, a durable alloy frame, and RockShox suspension, the Slayer A30 is designed for riders who demand performance and reliability.
Key Features:
✔ 170mm front and 170mm rear travel – Built for aggressive downhill and big-mountain riding.
✔ RockShox ZEB R Fork – 38mm stanchions for stiffness and precise control.
✔ RockShox Super Deluxe Coil Select R Shock – Consistent suspension performance in rough terrain.
✔ FORM Alloy Frame – Durable, lightweight aluminum construction.
✔ Shimano Deore 12-Speed Drivetrain – Smooth shifting with a wide-range cassette.
✔ Maxxis Assegai / Minion DHR II Tires – Maximum traction for technical descents.
For Rocky Mountain Slayer models, parts, and upgrades, visit MoreBikes.ca.
2. Suspension Setup – Geometry and Sag Adjustment
The Slayer features an adjustable chainstay length, letting you fine-tune handling for different riding styles.
Chainstay Adjustment and Effects:
🔹 Short Setting (434mm) – Quick handling for jumps and tight technical trails.
🔹 Long Setting (447mm) – More stability for steep, high-speed descents.
Sag Setup for Maximum Performance:
- Step 1: Wear full riding gear and get on the bike.
- Step 2: Bounce lightly to settle the suspension.
- Step 3: Measure sag using the O-ring or a sag meter.
-
Step 4: Adjust air pressure according to recommended settings:
- Freeride / Bike Park: 28-33% sag
- Enduro / Technical Riding: 25-30% sag
- More Pedal Efficiency: 20-25% sag
For shock pumps and setup tools, visit MoreBikes.ca.
3. Suspension Tuning – Rebound and Compression Adjustments
Rebound Tuning:
✔ Too Fast? The bike feels bouncy and unstable on landings.
✔ Too Slow? The suspension does not recover quickly, reducing control.
✅ Pro Tip: Start at mid-range rebound settings, then fine-tune based on terrain and weight.
Compression Damping:
✔ High-Speed Compression (HSC): Controls fork and shock behavior on big drops and jumps.
✔ Low-Speed Compression (LSC): Affects small bump sensitivity and pedaling efficiency.
Tuning Tip: Increase HSC for high-speed rough terrain, and adjust LSC for better support on climbs.
For suspension tuning kits and service parts, check MoreBikes.ca.
4. Drivetrain and Braking Setup
Shimano Deore 12-Speed Drivetrain:
- Reliable shifting for technical climbs and aggressive pedaling.
- Keep the chain lubed and check for wear every 500km.
- Adjust derailleur tension for optimal shifting performance.
Brakes – Shimano MT420 4-Piston Hydraulic Disc Brakes:
✔ Check brake pads for wear every 3 months.
✔ Bleed brakes every 6-12 months for consistent stopping power.
✔ Adjust lever reach and bite point for a personalized braking feel.
For brake pads, rotors, and upgrade kits, visit MoreBikes.ca.
5. Rocky Mountain Slayer A30 Service Schedule
Basic Maintenance Schedule:
✔ Before Every Ride: Check tire pressure, bolts, and drivetrain.
✔ Every 50 Hours (2-3 months): Clean suspension seals, inspect brake pads.
✔ Every 100 Hours (6 months): Lower leg service, drivetrain deep clean.
✔ Every 200 Hours (Annually): Full suspension rebuild, brake bleed, and bearing inspection.
For Rocky Mountain service kits and parts, check MoreBikes.ca.
6. Where to Get Your Rocky Mountain Slayer A30 Serviced
For professional servicing and upgrades, visit MoreBikes.ca – your source for Rocky Mountain bikes, parts, and maintenance essentials.
Final Thoughts
The Rocky Mountain Slayer A30 is a durable aluminum freeride and enduro bike, designed for steep terrain, big jumps, and aggressive riding. With adjustable geometry, RockShox suspension, and Shimano Deore components, this bike is built to handle anything from backcountry epics to bike park laps.
For Rocky Mountain bikes, parts, and accessories, visit MoreBikes.ca today! 🚴🔥
RockyMountainSlayer, FreerideBike, EnduroMTB, SuspensionTuning, MTBSetup, AdjustableChainstay, RockShoxSuspension, MoreBikes, MTBTech