1. Assembly Guide – Get Ready to Ride
When unboxing your Rocky Mountain Instinct, follow these steps to assemble your bike safely:
-
Install the Handlebars – Attach them to the stem and tighten the bolts evenly.
-
Attach the Front Wheel – Make sure the axle is securely fastened.
-
Set Up the Seatpost – Insert your dropper post (if applicable) and adjust it to the correct height.
-
Check Your Brakes – Make sure the rotors are aligned and that the levers engage properly.
-
Torque All Bolts – Follow the recommended torque specs to avoid over-tightening.
-
Inflate Tires to Recommended Pressure – Check sidewalls for PSI recommendations.
For tools and bike setup essentials, visit MoreBikes.ca****.
2. Suspension Setup – Dial in Your Ride
The Rocky Mountain Instinct comes with a Fox or RockShox suspension setup, depending on your build. Proper suspension setup ensures optimal performance and comfort on the trails.
Setting Sag:
-
Rear Shock: Set sag to 25-30% by adjusting air pressure.
-
Fork: Aim for 15-20% sag.
Rebound & Compression:
-
Start with rebound in the middle of the range and adjust based on trail feel.
-
Compression should be adjusted to balance comfort and support over rough terrain.
Need a shock pump? Find one at MoreBikes.ca****.
3. Drivetrain & Shifting Setup
The Instinct is available with Shimano or SRAM drivetrains. Follow these steps to keep your shifting crisp:
-
Limit Screw Adjustment – Prevents the chain from jumping off.
-
Cable Tension – Adjust for smooth, accurate shifting.
-
Chain Length – Ensure the correct length for your cassette size.
For replacement chains and cassettes, check out MoreBikes.ca****.
4. Brake Adjustments & Maintenance
Your Instinct may come with Shimano or SRAM hydraulic brakes. To maintain them:
-
Bed in new brake pads by applying firm pressure while rolling.
-
Check rotor alignment to avoid rubbing.
-
Avoid getting oil on rotors (unless you enjoy brake squeals that scare wildlife).
Need fresh brake pads? Visit MoreBikes.ca****.
5. Troubleshooting Common Issues
🔧 Shifting feels sluggish? Check cable tension and clean your derailleur.
🔧 Suspension feels harsh? Lower pressure or reduce compression damping.
🔧 Brakes are noisy? Clean rotors and replace worn pads.
Find solutions and upgrades at MoreBikes.ca****.
6. Upgrade & Parts Compatibility
Looking to upgrade? Here are some recommended upgrades for the Rocky Mountain Instinct:
-
Wheels: Upgrade to carbon rims for weight savings.
-
Drivetrain: Swap to a Shimano XT or SRAM GX for smoother shifting.
-
Brakes: Go for Shimano XT or SRAM Code RSC for better stopping power.
-
Suspension: Upgrade to a Fox 36 or RockShox Lyrik for aggressive riding.
Find all upgrades at MoreBikes.ca****.
Final Thoughts
Your Rocky Mountain Instinct is a versatile trail machine, and with proper setup and maintenance, it will perform flawlessly on any ride. Keep it clean, check bolts regularly, and upgrade when needed to keep it at peak performance.
For parts, upgrades, and expert advice, visit MoreBikes.ca today! 🚴♂️🔥