1. Rocky Mountain Altitude Powerplay Carbon 70 Overview
The Rocky Mountain Altitude Powerplay Carbon 70 is a high-performance enduro eMTB, built for aggressive riders who want to climb faster and descend harder. Featuring 170mm front / 160mm rear travel, Dyname 4.0 motor assist, RIDE-4 geometry adjustment, and a lightweight carbon frame, this bike is ready for bike parks, steep terrain, and big-mountain adventures.
Key Features:
✔ Dyname 4.0 Drive System – 108Nm of torque for powerful pedal assist.
✔ 720Wh Battery – Extended range for long, demanding rides.
✔ RIDE-4 Geometry Adjustment – Customizable head tube angle and suspension progressivity.
✔ 170mm front / 160mm rear travel – Optimized for aggressive enduro terrain.
✔ Fox 38 Performance Elite GRIP2 Fork – Stiff and precise for technical descents.
✔ Fox Float X2 Performance Elite Shock – Tunable air shock for maximum control.
✔ Shimano XT 12-Speed Drivetrain – Smooth, reliable shifting under high torque.
✔ Shimano XT 4-Piston Hydraulic Disc Brakes – Consistent, powerful stopping power.
For Rocky Mountain Altitude Powerplay Carbon 70 models, parts, and upgrades, visit MoreBikes.ca.
2. Dyname 4.0 Motor – How It Works
The Dyname 4.0 drive system provides instant power delivery, a natural pedaling feel, and industry-leading torque to help you conquer steep climbs and ride longer without fatigue.
Pedal Assist Modes:
🔋 Eco Mode – Maximizes battery efficiency for long rides.
🔋 Trail Mode – Balanced assist for technical climbs and flowy trails.
🔋 Ludicrous Mode – Maximum power output for steep, demanding sections.
✅ Pro Tip: Use Trail Mode for optimal efficiency, switching to Ludicrous Mode when tackling steep, technical terrain.
For batteries, chargers, and accessories, visit MoreBikes.ca.
3. Suspension Setup – RIDE-4 Geometry and Sag Adjustment
The RIDE-4 system lets you adjust the bike’s geometry and suspension characteristics to fit your riding style.
RIDE-4 Positions & Effects:
🔹 Position 1 (Slackest) – Best for aggressive descents and technical riding.
🔹 Position 2 – Balanced setup for enduro racing and technical terrain.
🔹 Position 3 – Increased pedaling efficiency while maintaining traction.
🔹 Position 4 (Steepest) – Optimized for climbing performance and responsiveness.
Sag Setup for Maximum Performance:
- Step 1: Wear full riding gear and mount the bike.
- Step 2: Bounce lightly to settle the suspension.
- Step 3: Measure sag using the O-ring or a sag meter.
-
Step 4: Adjust air pressure based on riding style:
- Technical Descents / Aggressive Riding: 28-33% sag
- All-Mountain / Trail Riding: 25-30% sag
For shock pumps and setup tools, visit MoreBikes.ca.
4. Suspension Tuning – Rebound and Compression Adjustments
Rebound Tuning:
✔ Too Fast? The bike feels bouncy and unstable over rough terrain.
✔ Too Slow? The suspension packs down and doesn’t recover quickly.
✅ Pro Tip: Start with mid-range rebound settings, then fine-tune based on weight and terrain.
Compression Damping:
✔ High-Speed Compression (HSC): Controls fork and shock behavior on large impacts.
✔ Low-Speed Compression (LSC): Affects small bump sensitivity and pedaling efficiency.
Tuning Tip: Increase HSC for high-speed technical riding and adjust LSC for better pedaling support.
For suspension tuning kits and service parts, check MoreBikes.ca.
5. Drivetrain, Braking, and Battery Care
Shimano XT 12-Speed Drivetrain:
- Designed to handle high eMTB torque for smooth shifting.
- Keep the chain lubed and check for wear every 500km.
- Adjust derailleur tension for optimal shifting performance.
Brakes – Shimano XT 4-Piston Hydraulic Disc Brakes:
✔ Check brake pads for wear every 3 months.
✔ Bleed brakes every 6-12 months for consistent stopping power.
✔ Adjust lever reach and bite point for a customized braking feel.
Battery Maintenance and Storage:
✔ Charge the battery indoors at room temperature for best lifespan.
✔ Avoid extreme heat or cold when storing.
✔ Store at 40-60% charge if not using for long periods.
For battery replacements, chargers, and drivetrain components, visit MoreBikes.ca.
6. Where to Get Your Rocky Mountain Altitude Powerplay Carbon 70 Serviced
For professional servicing and upgrades, visit MoreBikes Bike Services – your trusted shop for Rocky Mountain eMTBs, parts, and maintenance.
Final Thoughts
The Rocky Mountain Altitude Powerplay Carbon 70 is a race-ready enduro eMTB, designed for big-mountain lines, steep descents, and technical terrain. With Dyname 4.0 assist, RIDE-4 adjustability, and 170mm/160mm suspension, this bike is built for speed, power, and endurance.
For Rocky Mountain eMTBs, parts, and accessories, visit MoreBikes.ca today! 🚴⚡🔥