1. Rocky Mountain Altitude Powerplay Alloy 70 Overview
The Rocky Mountain Altitude Powerplay Alloy 70 brings top-tier enduro performance to an alloy frame, delivering Dyname 4.0 power assist, aggressive geometry, and high-performance suspension. Featuring 170mm front / 160mm rear travel, Fox Performance Elite suspension, and Shimano XT components, this eMTB is built for aggressive riders tackling steep descents and technical trails.
Key Features:
✔ Dyname 4.0 Drive System – 108Nm of torque for seamless power assist.
✔ 720Wh Battery – Long-range capability for full-day adventures.
✔ RIDE-4 Geometry Adjustment – Customizable geometry for any terrain.
✔ 170mm front / 160mm rear travel – Optimized for aggressive enduro riding.
✔ Fox 38 Performance Elite GRIP2 Fork – Stiff, adjustable, and race-ready.
✔ Fox Float X2 Performance Elite Shock – Tunable rear suspension for maximum control.
✔ Shimano XT 12-Speed Drivetrain – Smooth, reliable shifting under eMTB torque.
✔ Shimano XT 4-Piston Hydraulic Disc Brakes – Powerful stopping power for technical descents.
For Rocky Mountain Altitude Powerplay Alloy 70 models, parts, and upgrades, visit MoreBikes.ca.
2. Dyname 4.0 Motor – How It Works
The Dyname 4.0 drive system delivers instant pedal assist, providing natural-feeling power to make steep climbs effortless. With 108Nm of torque, it’s one of the most powerful eMTB motors available.
Pedal Assist Modes:
🔋 Eco Mode – Maximizes battery life for extended rides.
🔋 Trail Mode – Balanced assist for technical climbs and flowy terrain.
🔋 Ludicrous Mode – Maximum power output for steep, demanding sections.
✅ Pro Tip: Use Trail Mode for optimal efficiency and switch to Ludicrous Mode when extra torque is needed.
For battery replacements, chargers, and accessories, visit MoreBikes.ca.
3. Suspension Setup – RIDE-4 Geometry and Sag Adjustment
The RIDE-4 system lets you fine-tune the bike’s geometry and suspension characteristics based on your riding style.
RIDE-4 Positions & Effects:
🔹 Position 1 (Slackest) – Best for aggressive descents and technical terrain.
🔹 Position 2 – Balanced setup for enduro racing and rough trails.
🔹 Position 3 – Increased pedaling efficiency while maintaining traction.
🔹 Position 4 (Steepest) – Optimized for climbing performance and responsiveness.
Sag Setup for Maximum Performance:
- Step 1: Wear full riding gear and mount the bike.
- Step 2: Bounce lightly to settle the suspension.
- Step 3: Measure sag using the O-ring or a sag meter.
-
Step 4: Adjust air pressure based on riding style:
- Technical Descents / Aggressive Riding: 28-33% sag
- All-Mountain / Trail Riding: 25-30% sag
For shock pumps and setup tools, visit MoreBikes.ca.
4. Suspension Tuning – Rebound and Compression Adjustments
Rebound Tuning:
✔ Too Fast? The bike feels bouncy and unstable over rough terrain.
✔ Too Slow? The suspension packs down and doesn’t recover quickly.
✅ Pro Tip: Start with mid-range rebound settings, then fine-tune based on weight and terrain.
Compression Damping:
✔ High-Speed Compression (HSC): Controls fork and shock behavior on big hits and drops.
✔ Low-Speed Compression (LSC): Affects small bump sensitivity and pedaling efficiency.
Tuning Tip: Increase HSC for high-speed technical riding and adjust LSC for better pedaling support.
For suspension tuning kits and service parts, check MoreBikes.ca.
5. Drivetrain, Braking, and Battery Care
Shimano XT 12-Speed Drivetrain:
- Built to handle high eMTB torque for smooth shifting.
- Keep the chain lubed and check for wear every 500km.
- Adjust derailleur tension for optimal performance.
Brakes – Shimano XT 4-Piston Hydraulic Disc Brakes:
✔ Check brake pads for wear every 3 months.
✔ Bleed brakes every 6-12 months for consistent stopping power.
✔ Adjust lever reach and bite point for a customized braking feel.
Battery Maintenance and Storage:
✔ Charge the battery indoors at room temperature for best lifespan.
✔ Avoid extreme heat or cold when storing.
✔ Store at 40-60% charge if not using for long periods.
For battery replacements, chargers, and drivetrain components, visit MoreBikes.ca.
6. Where to Get Your Rocky Mountain Altitude Powerplay Alloy 70 Serviced
For professional servicing and upgrades, visit MoreBikes Bike Services – your trusted shop for Rocky Mountain eMTBs, parts, and maintenance.
Final Thoughts
The Rocky Mountain Altitude Powerplay Alloy 70 is a high-performance enduro eMTB, delivering powerful pedal assist, aggressive geometry, and top-tier suspension. With Dyname 4.0 assist, 170mm/160mm travel, and RIDE-4 adjustability, this bike is ready for steep descents, technical trails, and long adventure rides.
For Rocky Mountain eMTBs, parts, and accessories, visit MoreBikes.ca today! 🚴⚡🔥