1. RockShox SID SL Select 2P Overview
Model ID: FS-SIDS-SEL2-D1
MSRP: $689
The RockShox SID SL Select 2P is built for cross-country racing with a lightweight chassis and race-proven performance. Featuring the Charger RL damper with two-position compression settings (Open/Lock) and a DebonAir air spring, it provides control, efficiency, and confidence on technical terrain.
Key Features:
✔ NEW 110mm travel option for riders seeking extra capability.
✔ NEW Charger RL damper with 2P compression settings (Open/Lock).
✔ NEW Maxima Plush Dynamic Suspension Lube for reduced friction.
✔ Lightweight 32mm chassis designed specifically for XC racing.
✔ DebonAir air spring tuned for higher ride height and improved control.
For RockShox forks, upgrades, and service kits, visit MoreBikes.ca.
2. Setting Sag for XC Performance
Proper sag setup ensures optimal efficiency, comfort, and control on varying terrain.
-
Step 1: Wear your riding gear and mount the bike.
-
Step 2: Bounce a few times to settle the suspension.
-
Step 3: Have a friend check the sag or use a sag meter.
-
Step 4: Adjust air pressure accordingly:
-
15-20% sag for a firm, race-ready setup.
-
20-25% sag for added comfort on technical XC trails.
-
For RockShox suspension pumps and setup tools, visit MoreBikes.ca.
3. RockShox 2P System – How It Works
The 2P (Two Position) System allows riders to quickly toggle between two compression settings:
✔ Open Mode: Full travel for technical sections and descents.
✔ Lock Mode: Maximum efficiency for smooth climbs and sprinting.
🛠 Setup Tip: Ensure the 2P remote is correctly installed and fine-tuned for smooth operation.
For RockShox tuning tools and setup guides, visit MoreBikes.ca.
4. High-Speed vs. Low-Speed Compression Tuning
The RockShox SID SL Select 2P allows for additional manual tuning for a personalized ride feel.
✔ High-Speed Compression (HSC): Controls fork response to big impacts like jumps and rock gardens.
-
Too soft? Bottoming out on hard hits.
-
Too firm? Harsh ride over aggressive terrain.
-
Pro Tip: Start mid-range and adjust based on riding style.
✔ Low-Speed Compression (LSC): Affects fork movement under braking, slow-speed pedaling forces, and small bumps.
-
Too soft? Excessive fork dive under braking.
-
Too firm? Reduced sensitivity to small bumps.
-
Pro Tip: Firmer LSC settings improve pedaling efficiency.
For RockShox tuning tools and parts, visit MoreBikes.ca.
5. Rebound Tuning – Keeping the Ride Balanced
Rebound tuning controls how quickly the fork extends after absorbing an impact.
✔ Too Fast? The fork feels bouncy and unstable.
✔ Too Slow? The fork packs down on repeated hits, reducing control.
🛠 Setup Tip:
-
Start in the middle of the rebound range.
-
Test on different terrains and fine-tune as needed.
For RockShox rebound tuning kits, check MoreBikes.ca.
6. RockShox SID SL Select 2P Service Schedule
Routine maintenance ensures peak performance and extends fork longevity. Follow this schedule:
✔ Every 100 Hours or 6 Months – Lower leg service (clean and re-lube wipers, refresh bath oil).
✔ Every 200 Hours or Annually – Full damper and air spring service.
✔ Heavy Use? Get a professional service at Fluid Function.
For RockShox service kits and rebuild tools, visit MoreBikes.ca.
7. Where to Get Your RockShox SID SL Select 2P Serviced
For full fork servicing, these are your best options: ✔ Fluid Function – Experts in RockShox fork maintenance.
✔ MoreBikes.ca – Shop for new forks, parts, and service kits.
Final Thoughts
The RockShox SID SL Select 2P is a top-tier XC fork designed for lightweight efficiency and race-ready performance. Proper setup and routine maintenance will keep it performing at its best, whether you’re racing or crushing local trails.
For RockShox forks, suspension tools, and upgrade options, visit MoreBikes.ca today! 🚴♂️🔥
#RockShoxSIDSL #2PSystem #ForkTuning #RockShoxSuspension #BikeMaintenance #XCRacing #PedalEfficiency #FluidFunction #MoreBikes #MTBTech