1. Fox 40 Setup Guide
Setting Sag for the Perfect Ride
The Fox 40 is a dual-crown downhill fork designed for big hits and fast descents. Setting sag correctly ensures optimal performance.
-
Step 1: Wear full riding gear and get into your downhill attack position.
-
Step 2: Have a friend check the sag or use a sag meter.
-
Step 3: Adjust air pressure or coil preload accordingly:
-
15-20% sag for aggressive downhill riding.
-
20-25% sag for a slightly softer, more forgiving ride.
-
For Fox suspension pumps and setup tools, visit MoreBikes.ca.
2. High-Speed vs. Low-Speed Compression Tuning
The Fox 40 features high-speed and low-speed compression adjustments, critical for optimizing big-hit absorption and stability.
✔ High-Speed Compression (HSC): Controls the fork’s response to large impacts, like jumps and rock gardens.
-
Too soft? Bottoming out on big hits.
-
Too firm? Uncomfortable, harsh ride over rough terrain.
-
Pro Tip: Start mid-range and fine-tune based on terrain.
✔ Low-Speed Compression (LSC): Affects how the fork responds to braking and slow-speed movements.
-
Too soft? The fork dives under braking.
-
Too firm? Reduces sensitivity to small bumps.
-
Pro Tip: If your front end feels unstable in corners, slightly increase LSC.
For Fox tuning tools and parts, visit MoreBikes.ca.
3. Rebound Tuning – Keeping the Fork Under Control
Rebound controls how quickly the fork returns after compression.
✔ Too Fast? The fork will feel bouncy and unstable. ✔ Too Slow? The fork will pack down and feel sluggish on consecutive hits.
🛠 Setup Tip:
-
Start in the middle of the rebound range.
-
Test on a rough descent and adjust based on feel.
For Fox rebound tuning kits, check MoreBikes.ca.
4. Fox 40 Service Schedule
Proper maintenance ensures your Fox 40 remains buttery smooth and responsive. Stick to this service schedule:
✔ Every 100 Hours or 6 Months – Lower leg service (clean and re-lube wipers, refresh bath oil). ✔ Every 200 Hours or Annually – Full damper and air spring service. ✔ Heavy Use? Get a full rebuild at Suspension Werx.
For Fox 40 service kits and rebuild tools, visit MoreBikes.ca.
5. Where to Get Your Fox 40 Serviced
For full suspension servicing, these are your best options: ✔ Suspension Werx (North Vancouver) – Experts in Fox fork maintenance. ✔ MoreBikes.ca – Shop for new forks, parts, and service kits.
Final Thoughts
Your Fox 40 is a downhill beast, but only if it's properly dialed in and maintained. Follow this guide for optimal performance, and keep up with regular servicing for a smooth, controlled ride.
For Fox forks, suspension tools, and upgrade options, visit MoreBikes.ca today! 🚴♂️🔥
#Fox40 #MTBSetup #ForkTuning #FoxSuspension #BikeMaintenance #DownhillMTB #DHSetup #SuspensionWerx #MoreBikes #MTBTech